Stainless steel AISI 316L filter for compressed air, gas and liquids.


Filter for inlet pressure up to 50 bar (725 psi) in the standard version.
Connections 1 ½”-GF and 2”-GF by flanges screwed to the body.
Other connections available on request.
Available with filtration: 5 μm or 50 μm.
Automatic drain SAI (up to 15 bar) or manual drain SM (up to 30 bar).
Hexagonal cap drain for inlet pressure greater than 30 bar
and for gas and liquids versions.
Available the ATEX 2014/34/EU version
For use in potentially explosive atmospheres zones:
1, 21, 2, 22 (not applicable in mines and zone 0).
Available the EAC TP TC 032/2013 or EAC-EX TP TC 012/2011 versions for the Russian market. The product complies with the directive 2014/34/EU PED.

It is possible to assemble units composed of:
Filter + Regulator + Lubricator


Technical data

CompatibilityCompressed air | Tecnhical gases and their mixtures | Liquids | Oils
Max Inlet PressureWith automatic drain 15 bar | With manual drain 30 bar | Without drain (cap) 50 bar
IN/OUT Connection1”1/2-F | 2”-F (GAS/NPT) | UNI EN 1092-1 | ASME B16.5
Working TemperatureStandard -40°+347°F | Available on request from -76°F up to +608°F
Filtration Rate5μm | 50 μm (sintered stainless steel)
Weight~25,3 lb
CertificationsPED 2014/68/UE | ATEX 2014/34/UE | MOCA 1935/2004
Internals and Body MaterialStainless steel AISI 316L
Seals MaterialEPDM FDA | FPM | FVMQ | FFKM
AccesoriesWall mounting bracket
Spare Parts KitO-rings | filter cartridge

Technical design